Recruitment process steps: flowchart from job posting to offer, and reference checks

What are the stages of the recruitment process and how long does it take? An eight-step flowchart, what to record at each stage and how to check references.

FUFerhat UğurluYazSis TeamPublished: November 22, 20269 min read
In short

The recruitment process consists of approving the need, posting the job, collecting applications, screening, interviewing, checking references, deciding and making the offer. Each stage should have an output and a record: the posting date, the source of the application, the interview notes, the reason for the decision. To measure the process, keep the stage dates in the candidate record; without this record, the question “Why did it take so long?” cannot be answered.

A position has been open for months, and everyone explains why differently. HR says, “We didn’t get enough applications,” the department manager says, “The ones who applied weren’t suitable,” and management asks, “Why did the interviews drag on so long?” All three answers may be true; but if there is no record showing how long the process waited at each stage, the discussion runs on impressions and the same questions come up again at every meeting. The recruitment team may not be slow; the process may be waiting at an invisible stage. This article separates the stages of the recruitment process one by one and shows what should be recorded at each stage.

The recruitment process is the flow that runs from the approval of a staffing need until the candidate accepts the offer and starts work, made up of job posting, application, evaluation, interview, decision and offer steps. The order of the stages varies a little from company to company, but each stage should have an output and an owner.

Recruitment process flowchart

Need and approval → Job posting → Application → Screening → Interview → Reference check → Decision → Offer → Start date

The table below breaks this flow down stage by stage: it shows what happens at each stage, which record should be kept and who the owner could be. The owner column is an example; it varies with your organisation.

StageWhat happens?What to recordOwner
1. Need and approvalIt is made clear why the position is being opened and who approved it.Position title, reason, approver, target start periodDepartment manager, HR
2. Job postingThe position is published with expectations and how to apply.Posting text, publication date, publication channelHR
3. ApplicationCandidates apply through a single form.Candidate details, CV, application source, candidate consentHR
4. ScreeningApplications are reviewed against criteria.Decision to advance or close, with a short reasonHR, hiring manager
5. InterviewSelected candidates are interviewed.Interview date, interviewers, scores and notesHR, department manager
6. Reference checkPrevious work experience is verified.Who was spoken to, what was said, dateHR
7. DecisionThe interviewers combine their assessments.Decision and reasonDepartment manager, HR
8. Offer and startThe offer is made; if accepted, the candidate is handed over to the onboarding process.Offer date, candidate’s response, start dateHR

Stage by stage: what to watch for

Need and approval. The process starts before the job posting text. Is the position new, or is it replacing someone who left? What is the output of the job, measured by results? If these answers are not in writing, the posting stays generic, applications scatter and everyone looks for a different person in the interview. The approval step is also defined here: who needs to say “yes” before the posting is published?

Job posting and application. The posting should describe the position and the real expectations; the application form should ask only for the information needed for the assessment. Having applications come in through a single channel also lets you track the sources separately: for candidates applying to the same position through the careers page, a referral or a job board, the source should be in the record.

Screening. Write the first screening criteria together with the posting, and apply the same criteria to every application. Recording in a word or two why applications were closed saves time if the same candidate applies for another position later, and lets you answer the question “Why weren’t they hired?”

Decision and offer. Plan the decision meeting so that the interviewers fill in their forms beforehand. Who makes the decision, where the reason is written down and who will communicate the offer should be clear from the start. If the offer is accepted, the process does not end; the point at which the candidate is handed over to the onboarding steps is the first step of the next process.

How long does the recruitment process take?

There is no single right duration; it depends on the level of the position, the number of candidates in the market and your approval chain. That is why measuring your own duration stage by stage is more useful than comparing it with someone else’s. To measure it, it is enough to have the following dates in the record:

  • The date the posting was published and the date the first application arrived.
  • The date an application arrived and the date of the first assessment.
  • The wait between the assessment and the interview.
  • The wait between the interview and the decision.
  • The wait between the decision and the offer.
  • The wait between the offer and the candidate’s response.

These dates come naturally from the outputs in the table, as long as they are written down somewhere. Most companies only notice that they lose the most time between “decision after interview” and “offer after decision” once these dates become visible. The same record also yields another piece of information: how many candidates advanced and how many were closed at each stage. So if many people apply but few reach the interview, you can see that the problem may lie in the posting text or the screening criteria; if many reach the interview but few receive an offer, the criteria may be unclear.

How do you check references?

A reference check is the step of verifying a candidate’s previous work experience with people the candidate knows or has worked with. It is usually done at the end of the interviews, before the decision is made.

  1. Ask the candidate for referees and tell the candidate in advance that you will contact them.
  2. Use the same short list of questions for each referee.
  3. Take written notes during the call; record whom you asked, when, what you asked and what answer you got.
  4. Add the reference information to the candidate record together with the interview notes; do not leave it in a separate file.
  5. If what the referee says differs from what the candidate told you, talk openly with the candidate before making a decision.

Questions in a reference call should be short and the same for everyone:

  • In what period and in what role did you work with the candidate?
  • What was the candidate’s level of responsibility, with how many people and on which topics did they work?
  • What are two of their strengths?
  • What is one area they need to develop?
  • How do you remember the reason they left?
  • Would you work with them again if there were a suitable position?

Information about referees and the candidate is personal data; decide whom you will contact and how the information will be stored based on your assessment under KVKK, Turkey’s personal data protection law. Rather than making reference information the sole reason for a decision, read it together with the interview notes.

Common mistakes in the recruitment process

  • The posting is published, but nobody decides who will assess applications and by what date.
  • Applications come in through two separate channels, and the same candidate is recorded twice.
  • The interview date is planned, but the candidate file is sent to the interviewer just before the interview.
  • Candidates whose applications are closed get no response and never learn the outcome.
  • The decision is made verbally and no reason is written down; when things drag on, nobody remembers why.
  • After the offer is accepted, nobody is assigned to the onboarding steps.

Where does the process break if you run it with e-mail, Excel and a shared folder?

In a small organisation with few positions, a spreadsheet with the stages as columns and a folder for each candidate does the job. As the process grows, the first break is in the stage dates: because dates are not written down, duration cannot be measured. The second is in ownership: the candidate waits in the “after interview” stage, but it is unclear whose turn it is. The third is in confidentiality: CVs, interview notes and reference calls sit in the same folder, open to everyone. The fourth is in visibility: the department manager has to ask HR where the candidate is.

From posting to decision with an applicant tracking system: the flow in KurumsalPortal

The Recruitment Management module works as an applicant tracking system, and its flow matches the following chain: publish the posting, collect applications, evaluate the candidate, schedule the interview, complete the decision. Positions are published as job postings; candidates submit their CVs and KVKK consent through the online application form. Applications are collected in a central candidate pool; HR, hiring managers and department managers reach the candidate’s application history and documents from a single record. Evaluation notes, interview details and the decision are kept in the candidate’s record.

Reports on the process show which sources produce candidates who advance. The scope of additional measures such as stage duration is clarified in the needs analysis. KurumsalPortal runs on the customer’s own server and is used from a phone browser.

If you want to break your recruitment flow into stages and track it in a single record, you can take a look at the Recruitment Management module and the overall structure of KurumsalPortal, and we can carry out the needs analysis together, starting from your current process.

Frequently asked questions

How many stages does the recruitment process have?

There is no fixed number. In this article, we used eight stages: need and approval, job posting, application, screening, interview, reference check, decision and offer. In small companies, some stages may be combined; what matters is that each stage has an output and an owner.

Where does the recruitment process take longest?

Most often at the waiting points: the decision after the interview, the offer after the decision and the approval steps. To see where you are waiting, keep the stage dates in the candidate record.

Is a reference check necessary for every candidate?

This is a matter of company policy. If the position carries high responsibility, the reference call is made before the decision; applying the same question list to all candidates gives consistency. The result should also be linked to the candidate record.

Can you get reports on the recruitment process?

In the KurumsalPortal Recruitment Management module, reports on the process show which sources produce candidates who advance. The scope of any additional measurement needs is set in the needs analysis.

How many interview rounds should there be?

It depends on the level and responsibility of the position. Setting separate criteria and evidence notes for each round prevents the same questions from being asked again and again.

FU
Ferhat Uğurlu · YazSis Team

Builds enterprise software, AI and digital transformation products together with the YazSis team.