KOSGEB SME Digital Transformation Support in Turkey: eligibility, application, preparation

What is KOSGEB’s SME Digital Transformation Support Programme in Turkey and who can apply? Eligibility, application steps and the process inventory to prepare.

FUFerhat UğurluYazSis TeamPublished: November 20, 20269 min read
In short

The SME Digital Transformation Support Programme is a Turkish programme under which KOSGEB, Turkey’s SME development organisation, covers the interest cost of investment loans that small and medium-sized manufacturers take out from partner banks, on a non-repayable basis. Applying requires an approved digital transformation or maturity report from consultants of authorised institutions; micro enterprises are not eligible. Preparing a process inventory and a priority list before applying strengthens both the consultant meeting and the purchasing decision.

The owner of a metalworking shop reads a message circulating in an industry group: “KOSGEB is apparently giving interest support for digital transformation.” The message does not say who can apply, which expenses are covered or how the process works. The accountant says, “We’ll check the conditions”; the production manager has already drawn up a list of software. Yet in a programme like this, the order runs the other way: first the company’s eligibility, then a report from an authorised consultant, and only after that the purchasing decision. In this article we summarise the official conditions of the SME Digital Transformation Support Programme run by KOSGEB, Turkey’s Small and Medium Enterprises Development Organization, and explain the work you should have ready before applying.

The SME Digital Transformation Support Programme is a KOSGEB programme that provides non-repayable support for the interest cost of loans that small and medium-sized manufacturing companies in Turkey take out for digital transformation investments from partner banks, i.e. banks that have signed a protocol with KOSGEB. The information below is based on KOSGEB’s programme page and the programme directive dated 11 May 2026 (revision 04), read on 22 October 2026. Conditions may change; check KOSGEB’s current page before applying.

What does the programme provide, and what does it not?

The programme is not a cash grant. The company takes out an investment loan from a bank with which a protocol has been signed; KOSGEB supports the interest cost of this loan. The company pays the loan instalments. The interest support is calculated and paid to the company after the purchases approved by KOSGEB’s Board have been made, the instalment due has been paid and KOSGEB staff have completed an on-site inspection.

  • Covered expenses: machinery, equipment, software and hardware expenses that the Board finds eligible; all of them must be new (directive Article 5).
  • Duration: The programme period is 24 months and the maximum loan term is 36 months; the loan must be drawn within the programme period (Article 6).
  • Limits: The lower and upper loan limits are set out in the directive and on the programme page. Because the amounts can be updated, we do not repeat them here.
  • One time only: A company can benefit from this programme only once (Article 5).
  • An application creates no entitlement: Submitting an application does not commit KOSGEB or give the applicant any rights; the Board may accept or reject the application or ask for corrections (Articles 8 and 10).

Who can apply for SME digital transformation support in Turkey?

ConditionWhat the directive saysCheck before applying
Registration and statusA natural or legal person as defined in the Turkish Commercial Code; registered and active in the KOSGEB system; Enterprise Declaration up to date (Article 7)Are your KOSGEB registration and Enterprise Declaration up to date?
SizeSmall or medium-sized as of the application date; micro enterprises are not eligible (Article 7)Which size group does your company fall into on the application date?
SectorActivity in manufacturing, Section C under NACE Rev. 2 (Article 7)Is your main activity code in the manufacturing group?
Consultancy and reportDigital transformation consultancy received from consultants of authorised institutions, and an approved digital transformation or maturity assessment report (Article 7)From which consultant, and in what form, will you obtain the report?
Financial positionTotal equity positive in the last financial year; operating profit positive in at least one of the last three financial years (Article 7)Ask your accountant for these two indicators.
Excluded sectorsCompanies listed in the “ineligible sectors and activities” table of the institution providing the loan funds cannot apply (Article 7)Is your activity listed in that table?

The programme page lists consultants accredited or authorised by TUBITAK TUSSIDE, the MESS Technology Center (MEXT) and the IHKIB Digital Transformation Center as able to issue the report. You must apply within the validity date or roadmap period stated in the report; if no such period is stated, you apply within one year of the report’s approval date (Article 7).

KOSGEB application process step by step

  1. Report: Obtain an approved digital transformation or maturity assessment report from an authorised consultant.
  2. Application form: Fill in and confirm the application form in KOSGEB’s SME Information System in line with the strategies recommended in the report (Article 8).
  3. Review: The responsible staff member reviews the application within seven days; if anything is missing, seven days are given for corrections (Article 9).
  4. Board assessment: The Board accepts or rejects the application or asks for corrections (Article 10).
  5. Bank: A company approved by the Board applies for a loan at one of the banks with which a protocol has been signed.
  6. Purchase and instalment: The approved items are purchased and the loan instalment due is paid.
  7. Payment request: The Payment Request Form is completed; KOSGEB staff visit the company and draw up an inspection report for the machinery, equipment, software and hardware purchased (Article 17).
  8. Interest support: After approval, the calculated support is paid to the company.

Points to watch during and after the application

  • A company that does not draw a loan during the programme period is deemed not to have benefited from the programme (Article 6).
  • Supported machinery, equipment, software and hardware cannot be sold, leased or transferred until one year after the end of the final loan term (Article 18).
  • If a time-limited software licence or cloud access cost is supported, the software cannot be leased or transferred to anyone else during the supported licence or usage period (Article 18).
  • If expense items do not meet the minimum technical specifications, or are incomplete or incorrect, no interest support is paid; once the problem is fixed, a new inspection report can be drawn up (Article 17).
  • The Board’s assessment of financial adequacy is based on the information shared by the bank that is party to the protocol (Article 10).

Preparing before you apply: process inventory and priority list

The directive requires the application form to be filled in according to the strategies in the report. The report draws the roadmap; but going into the consultant meeting as someone who knows the business well makes the meeting productive and also clarifies the later question of “what should we buy?”. Three documents are enough for this: a process inventory, a needs analysis and a priority list. The table below offers a starting point for a first version of the inventory; replace the rows with your own processes.

ProcessCurrent situationNeedData and system dependencyPriority
Order and production planningPlanning in a spreadsheet, changes passed on by phoneKeeping the plan up to date in one placeSales orders and stock informationHigh / medium / low
Stock and warehouseCounts by hand, discrepancies surface at month endReal-time stock visibilityWarehouse movements, ERP recordsHigh / medium / low
Quality recordsPaper formsRecording and tracking nonconformitiesProduction batch informationHigh / medium / low
Maintenance and breakdownsBreakdowns reported verballyBreakdown history and assignment of responsibilityMachine inventoryHigh / medium / low

Completing this list before you see the consultant is good preparation:

  1. Confirm that your KOSGEB registration and Enterprise Declaration are up to date.
  2. Check your company size and main activity code.
  3. Ask your accountant for total equity for the last financial year and operating profit for the last three years.
  4. Draw up the process inventory; for each process, write down who works on it and with which tools.
  5. Identify the bottleneck in each process: waiting, rework, errors, dependence on individuals.
  6. Prepare a list of existing machinery, software and data sources.
  7. Rank the processes by business impact, risk and feasibility.
  8. Weigh your loan needs and repayment capacity realistically; remember that the bank will assess them.

Is keeping the inventory in Excel enough?

Excel is reasonable for the preparation stage: the inventory is drawn up once, two or three people add comments, and it is sent to the consultant. The problem is that spreadsheets multiply across several people and nobody knows which one is current; versions circulating on WhatsApp usually spoil the work. Assigning one file to one owner and dating every change is usually enough for the preparation stage.

Where does YazSis fit into this programme?

This article does not mean that YazSis services are eligible under the programme; we make no such claim. Only consultants of authorised institutions issue the programme’s report, and the Board decides which expenses are eligible. YazSis Digital Transformation work does not replace this report. Its contribution lies elsewhere: process discovery that makes the current flow, actors, data and exceptions visible, bottleneck analysis that reveals waiting, rework and dependence on individuals, and integration and automation roadmaps — in other words, the groundwork for the inventory and priorities that need to be prepared before applying. Once the priority processes are clear, it also becomes clear which indicators to track; to monitor these indicators on role-based dashboards, you can look at KurumsalPortal’s Dashboard Management module. This, too, is not a claim of eligibility for the programme.

If you would like to clarify your processes, bottlenecks and priorities together with us, see the Digital Transformation page.

Frequently asked questions

What is KOSGEB’s SME Digital Transformation Support Programme?

It is a programme run by KOSGEB in Turkey for small and medium-sized manufacturing companies that provides non-repayable support for the interest cost of investment loans taken from partner banks for digital transformation investments. The loan comes from the bank; the support covers the interest cost.

How do you apply for the SME digital transformation support programme?

First, an approved digital transformation or maturity assessment report is obtained from an authorised consultant; then the application form is completed in KOSGEB’s SME Information System. KOSGEB reviews the application and the Board assesses it; an approved company then applies to the bank for a loan.

Can a service or trading company apply?

The programme page and the directive refer to companies operating in manufacturing, Section C under NACE Rev. 2. Companies in other sectors should look at the conditions of the other programmes listed on KOSGEB’s support page.

Are digital transformation consultancy and a report mandatory?

Yes. According to the directive, companies that have received digital transformation consultancy from consultants of authorised institutions and have an approved digital transformation or maturity assessment report can apply.

Can SME digital transformation support be received only once?

Under Article 5 of the directive, a company can benefit from this support programme once. A company that does not draw a loan during the programme period is deemed not to have benefited from the programme.

Where can I check whether the programme is current?

KOSGEB’s SME Digital Transformation Support Programme page and directive are the reference. Because the directive is revised over time, confirm with KOSGEB before applying which version is current and whether the programme is open for applications.

Sources

Last legal review: October 22, 2026

FU
Ferhat Uğurlu · YazSis Team

Builds enterprise software, AI and digital transformation products together with the YazSis team.